Description

Description

ELRING Dirko™ HT oxime (neutral curing) is a highquality, high
temperature resistant single component silicone-based sealing compound that exhibits permanently resilient properties. It provides excellent adhesion on all
standard metals, cast iron, plastics (except for PE, PP
and PTFE) and glass. Due to a reaction with humidity
in the air Dirko™ HT oxime cures to form silicone. The
product can be used for a very wide range of applications.

Resistant to:
Mineral oils (including additives), synthetic oils,
lubricating grease, coolants, UV radiation, cold and
hot water, salt water, cleaning agents, weak acids
and alkalis

Possible applications:
Valve cover, oil pan, water and oil pump, differential housing, gearbox, gear oil sump, thermostat
housing, control housing, axle cover, flange connection, headlights, rear light, battery compartment

Skin formation time (23°C, 50\% relative humidity)
5 - 10 min (DIN EN ISO 291)

Curing time (23°C, 50\% relative humidity)
Approx. 4.5 mm / 24 h (DIN EN ISO 291)

In 70ml tube incl. Accessories.

Specifications


Colour	Grey
Oil resistant	Yes
Max temp (°C)	+315 °C (24h)
Max continuous temp (°C)	-60 to +285
Chemical basis	Oxime silicone
Components	Single component
Maximum sealing gap	2,0 mm
Hardness	40 ± 5
Density (g/ml)	1,18 ± 0,2
volume	70 ml
Curing	Room temperature vulcanised (RTV)
Consistency	Pasty, stable, permanently resilient when cured
pH value	Neutral
Electrical conductivity	Insulating
Elastic modulus 100\%	1.0 ± 0.2 N/mm2
Tensile strength	3,3 ± 0,2 N / mm²
Elongation at break	400 ± 100 \%