Dummy load 100 watts , 50 Ohms, pour fréquences 1.8-30 MHz (amateur) et CB

A dummy load is a device used in place of an antenna to aid in testing a radio transmitter. It is substituted for the antenna while adjusting the transmitter, so that the transmitter does not interfere with other radio transmitters during the adjustments. If a transmitter is tested without a load, such as an antenna or a dummy load, the transmitter could be damaged. Also, if a transmitter is adjusted without a load, it will operate differently than with the load, and the adjustments may be incorrect.

This dummy load is designed to operate in the HF band +/- 1Mhz ~ 30 Mhz.

• Power Handling: 100 Watts.
  
• Connector: UHF (also known as Female PL259 or SO239).
  
• Impedance: 50 Ohm.
  
• Length: 6".
  
• Width: 2".
  
• Height: 2".